3736 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
dependabot[bot]	e1e295d33b	Bump com.opencsv:opencsv from 5.11.1 to 5.11.2 (#3793) ... [//]: # (dependabot-start) ⚠️ **Dependabot is rebasing this PR** ⚠️ Rebasing might not happen immediately, so don't worry if this takes some time. Note: if you make any changes to this PR yourself, they will take precedence over the rebase. --- [//]: # (dependabot-end) Bumps com.opencsv:opencsv from 5.11.1 to 5.11.2. [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2025-07-01 15:52:13 +01:00
dependabot[bot]	09b185febf	Bump commonmarkVersion from 0.24.0 to 0.25.0 (#3789) ... Bumps `commonmarkVersion` from 0.24.0 to 0.25.0. Updates `org.commonmark:commonmark` from 0.24.0 to 0.25.0 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/commonmark/commonmark-java/releases">org.commonmark:commonmark's releases</a>.</em></p> <blockquote> <h2>commonmark-java 0.25.0</h2> <h3>Added</h3> <ul> <li>Include OSGi metadata in jars (<code>META-INF/MANIFEST.MF</code> files) (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/378">#378</a>)</li> <li>More documentation with examples for <code>Node</code> classes (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/370">#370</a>)</li> </ul> <h3>Changed</h3> <ul> <li>GitHub tables: Tables are now parsed even if there's no blank line before the table heading, matching GitHub's behavior. (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/381">#381</a>)</li> </ul> <h3>Fixed</h3> <ul> <li><code>MarkdownRenderer</code>: Fix precedence for <code>nodeRendererFactory</code>: Factories passed to the builder can now override rendering for core node types. (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/368">#368</a>)</li> <li><code>MarkdownRenderer</code>: Fix exception with ordered lists with a long first number followed by a shorter one (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/382">#382</a>)</li> <li>Fix warning in Eclipse about &quot;missing 'requires transitive'&quot; (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/358">#358</a>)</li> <li>Fix Android incompatibility with <code>requireNonNullElseGet</code> (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/369">#369</a>)</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/commonmark/commonmark-java/blob/main/CHANGELOG.md">org.commonmark:commonmark's changelog</a>.</em></p> <blockquote> <h2>[0.25.0] - 2025-06-20</h2> <h3>Added</h3> <ul> <li>Include OSGi metadata in jars (<code>META-INF/MANIFEST.MF</code> files) (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/378">#378</a>)</li> <li>More documentation with examples for <code>Node</code> classes (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/370">#370</a>)</li> </ul> <h3>Changed</h3> <ul> <li>GitHub tables: Tables are now parsed even if there's no blank line before the table heading, matching GitHub's behavior. (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/381">#381</a>)</li> </ul> <h3>Fixed</h3> <ul> <li><code>MarkdownRenderer</code>: Fix precedence for <code>nodeRendererFactory</code>: Factories passed to the builder can now override rendering for core node types. (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/368">#368</a>)</li> <li><code>MarkdownRenderer</code>: Fix exception with ordered lists with a long first number followed by a shorter one (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/382">#382</a>)</li> <li>Fix warning in Eclipse about &quot;missing 'requires transitive'&quot; (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/358">#358</a>)</li> <li>Fix Android incompatibility with <code>requireNonNullElseGet</code> (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/369">#369</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="99e6050ae1"><code>99e6050</code></a> [maven-release-plugin] prepare release commonmark-parent-0.25.0</li> <li><a href="1701991138"><code>1701991</code></a> Merge pull request <a href="https://redirect.github.com/commonmark/commonmark-java/issues/385">#385</a> from commonmark/release-0.25</li> <li><a href="6354f02447"><code>6354f02</code></a> Prepare for version 0.25.0</li> <li><a href="adcf2f232c"><code>adcf2f2</code></a> Prepare CHANGELOG for release 0.25</li> <li><a href="8cc1fa2072"><code>8cc1fa2</code></a> Merge pull request <a href="https://redirect.github.com/commonmark/commonmark-java/issues/384">#384</a> from commonmark/central-publisher-portal</li> <li><a href="5e6b740271"><code>5e6b740</code></a> Migrate from OSSRH to Central Publisher Portal</li> <li><a href="7616e19533"><code>7616e19</code></a> Merge pull request <a href="https://redirect.github.com/commonmark/commonmark-java/issues/383">#383</a> from commonmark/markdown-renderer-ordered-list-fix</li> <li><a href="971aaa9ede"><code>971aaa9</code></a> MarkdownRenderer: Fix ordered list with long start number (fixes <a href="https://redirect.github.com/commonmark/commonmark-java/issues/382">#382</a>)</li> <li><a href="32c9290bc4"><code>32c9290</code></a> Merge pull request <a href="https://redirect.github.com/commonmark/commonmark-java/issues/381">#381</a> from commonmark/tables-without-blank-line-before</li> <li><a href="bb57a5f092"><code>bb57a5f</code></a> Parse tables without blank line before</li> <li>Additional commits viewable in <a href="https://github.com/commonmark/commonmark-java/compare/commonmark-parent-0.24.0...commonmark-parent-0.25.0">compare view</a></li> </ul> </details> <br /> Updates `org.commonmark:commonmark-ext-gfm-tables` from 0.24.0 to 0.25.0 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/commonmark/commonmark-java/releases">org.commonmark:commonmark-ext-gfm-tables's releases</a>.</em></p> <blockquote> <h2>commonmark-java 0.25.0</h2> <h3>Added</h3> <ul> <li>Include OSGi metadata in jars (<code>META-INF/MANIFEST.MF</code> files) (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/378">#378</a>)</li> <li>More documentation with examples for <code>Node</code> classes (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/370">#370</a>)</li> </ul> <h3>Changed</h3> <ul> <li>GitHub tables: Tables are now parsed even if there's no blank line before the table heading, matching GitHub's behavior. (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/381">#381</a>)</li> </ul> <h3>Fixed</h3> <ul> <li><code>MarkdownRenderer</code>: Fix precedence for <code>nodeRendererFactory</code>: Factories passed to the builder can now override rendering for core node types. (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/368">#368</a>)</li> <li><code>MarkdownRenderer</code>: Fix exception with ordered lists with a long first number followed by a shorter one (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/382">#382</a>)</li> <li>Fix warning in Eclipse about &quot;missing 'requires transitive'&quot; (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/358">#358</a>)</li> <li>Fix Android incompatibility with <code>requireNonNullElseGet</code> (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/369">#369</a>)</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/commonmark/commonmark-java/blob/main/CHANGELOG.md">org.commonmark:commonmark-ext-gfm-tables's changelog</a>.</em></p> <blockquote> <h2>[0.25.0] - 2025-06-20</h2> <h3>Added</h3> <ul> <li>Include OSGi metadata in jars (<code>META-INF/MANIFEST.MF</code> files) (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/378">#378</a>)</li> <li>More documentation with examples for <code>Node</code> classes (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/370">#370</a>)</li> </ul> <h3>Changed</h3> <ul> <li>GitHub tables: Tables are now parsed even if there's no blank line before the table heading, matching GitHub's behavior. (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/381">#381</a>)</li> </ul> <h3>Fixed</h3> <ul> <li><code>MarkdownRenderer</code>: Fix precedence for <code>nodeRendererFactory</code>: Factories passed to the builder can now override rendering for core node types. (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/368">#368</a>)</li> <li><code>MarkdownRenderer</code>: Fix exception with ordered lists with a long first number followed by a shorter one (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/382">#382</a>)</li> <li>Fix warning in Eclipse about &quot;missing 'requires transitive'&quot; (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/358">#358</a>)</li> <li>Fix Android incompatibility with <code>requireNonNullElseGet</code> (<a href="https://redirect.github.com/commonmark/commonmark-java/issues/369">#369</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="99e6050ae1"><code>99e6050</code></a> [maven-release-plugin] prepare release commonmark-parent-0.25.0</li> <li><a href="1701991138"><code>1701991</code></a> Merge pull request <a href="https://redirect.github.com/commonmark/commonmark-java/issues/385">#385</a> from commonmark/release-0.25</li> <li><a href="6354f02447"><code>6354f02</code></a> Prepare for version 0.25.0</li> <li><a href="adcf2f232c"><code>adcf2f2</code></a> Prepare CHANGELOG for release 0.25</li> <li><a href="8cc1fa2072"><code>8cc1fa2</code></a> Merge pull request <a href="https://redirect.github.com/commonmark/commonmark-java/issues/384">#384</a> from commonmark/central-publisher-portal</li> <li><a href="5e6b740271"><code>5e6b740</code></a> Migrate from OSSRH to Central Publisher Portal</li> <li><a href="7616e19533"><code>7616e19</code></a> Merge pull request <a href="https://redirect.github.com/commonmark/commonmark-java/issues/383">#383</a> from commonmark/markdown-renderer-ordered-list-fix</li> <li><a href="971aaa9ede"><code>971aaa9</code></a> MarkdownRenderer: Fix ordered list with long start number (fixes <a href="https://redirect.github.com/commonmark/commonmark-java/issues/382">#382</a>)</li> <li><a href="32c9290bc4"><code>32c9290</code></a> Merge pull request <a href="https://redirect.github.com/commonmark/commonmark-java/issues/381">#381</a> from commonmark/tables-without-blank-line-before</li> <li><a href="bb57a5f092"><code>bb57a5f</code></a> Parse tables without blank line before</li> <li>Additional commits viewable in <a href="https://github.com/commonmark/commonmark-java/compare/commonmark-parent-0.24.0...commonmark-parent-0.25.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2025-07-01 15:51:52 +01:00
dependabot[bot]	9760c30638	Bump io.swagger.core.v3:swagger-core-jakarta from 2.2.33 to 2.2.34 (#3791) ... Bumps io.swagger.core.v3:swagger-core-jakarta from 2.2.33 to 2.2.34. [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2025-07-01 15:51:38 +01:00
dependabot[bot]	afb1df02b6	Bump org.panteleyev.jpackageplugin from 1.6.1 to 1.7.3 (#3740) ... Bumps org.panteleyev.jpackageplugin from 1.6.1 to 1.7.3. [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Ludy <Ludy87@users.noreply.github.com>	2025-07-01 15:51:26 +01:00
Ludy	fd10e5db10	chore: include ignore_translation.toml in README sync commit (#3845) ... # Description of Changes - Updated the GitHub Actions workflow `.github/workflows/sync_files.yml` to also include `scripts/ignore_translation.toml` in the automatic commit step. - This TOML file lists translatable strings that should be excluded because they are explicitly marked as non-translatable. - Including it in the sync ensures that cleanup of such excluded strings is versioned together with README changes, improving consistency of translation tooling automation. --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-07-01 15:49:58 +01:00
stirlingbot[bot]	14d4fbb2a3	🤖 format everything with pre-commit by stirlingbot (#3804) ... Auto-generated by [create-pull-request][1] with **stirlingbot** [1]: https://github.com/peter-evans/create-pull-request Signed-off-by: stirlingbot[bot] <stirlingbot[bot]@users.noreply.github.com> Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>	2025-07-01 15:41:23 +01:00
stirlingbot[bot]	9eb534a6d2	🌐 Sync Translations + Update README Progress Table (#3807) ... ### Description of Changes This Pull Request was automatically generated to synchronize updates to translation files and documentation. Below are the details of the changes made: #### **1. Synchronization of Translation Files** - Updated translation files (`messages_*.properties`) to reflect changes in the reference file `messages_en_GB.properties`. - Ensured consistency and synchronization across all supported language files. - Highlighted any missing or incomplete translations. #### **2. Update README.md** - Generated the translation progress table in `README.md`. - Added a summary of the current translation status for all supported languages. - Included up-to-date statistics on translation coverage. #### **Why these changes are necessary** - Keeps translation files aligned with the latest reference updates. - Ensures the documentation reflects the current translation progress. --- Auto-generated by [create-pull-request][1]. [1]: https://github.com/peter-evans/create-pull-request --------- Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>	2025-07-01 15:41:06 +01:00
dependabot[bot]	0b342d463c	chore(deps): bump sigstore/cosign-installer from 3.9.0 to 3.9.1 (#3801) ... [//]: # (dependabot-start) ⚠️ **Dependabot is rebasing this PR** ⚠️ Rebasing might not happen immediately, so don't worry if this takes some time. Note: if you make any changes to this PR yourself, they will take precedence over the rebase. --- [//]: # (dependabot-end) Bumps [sigstore/cosign-installer](https://github.com/sigstore/cosign-installer) from 3.9.0 to 3.9.1. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/sigstore/cosign-installer/releases">sigstore/cosign-installer's releases</a>.</em></p> <blockquote> <h2>v3.9.1</h2> <h2>What's Changed</h2> <ul> <li>default action install to use release v2.5.1 by <a href="https://github.com/cpanato"><code>@​cpanato</code></a> in <a href="https://redirect.github.com/sigstore/cosign-installer/pull/193">sigstore/cosign-installer#193</a></li> <li>default cosign to v2.5.2 by <a href="https://github.com/cpanato"><code>@​cpanato</code></a> in <a href="https://redirect.github.com/sigstore/cosign-installer/pull/194">sigstore/cosign-installer#194</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/sigstore/cosign-installer/compare/v3.9.0...v3.9.1">https://github.com/sigstore/cosign-installer/compare/v3.9.0...v3.9.1</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="398d4b0eee"><code>398d4b0</code></a> default cosign to v2.5.2 (<a href="https://redirect.github.com/sigstore/cosign-installer/issues/194">#194</a>)</li> <li><a href="84f54a2bcd"><code>84f54a2</code></a> default action install to use release v2.5.1 (<a href="https://redirect.github.com/sigstore/cosign-installer/issues/193">#193</a>)</li> <li>See full diff in <a href="fb28c2b633...398d4b0eee">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2025-07-01 15:40:09 +01:00
dependabot[bot]	e7ac4b7b20	chore(deps): bump step-security/harden-runner from 2.12.1 to 2.12.2 (#3849) ... Bumps [step-security/harden-runner](https://github.com/step-security/harden-runner) from 2.12.1 to 2.12.2. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/step-security/harden-runner/releases">step-security/harden-runner's releases</a>.</em></p> <blockquote> <h2>v2.12.2</h2> <h2>What's Changed</h2> <p>Added HTTPS Monitoring for additional destinations - *.githubusercontent.com Bug fixes:</p> <ul> <li>Implicitly allow local multicast, local unicast and broadcast IP addresses in block mode</li> <li>Increased policy map size for block mode</li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/step-security/harden-runner/compare/v2...v2.12.2">https://github.com/step-security/harden-runner/compare/v2...v2.12.2</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="6c439dc8bd"><code>6c439dc</code></a> Merge pull request <a href="https://redirect.github.com/step-security/harden-runner/issues/562">#562</a> from step-security/rc-22</li> <li><a href="bf5688696d"><code>bf56886</code></a> update agent</li> <li><a href="5436dac7b5"><code>5436dac</code></a> update agent</li> <li><a href="88d305a353"><code>88d305a</code></a> update agent</li> <li><a href="b976878278"><code>b976878</code></a> update agent</li> <li><a href="875cc92db2"><code>875cc92</code></a> Update agent</li> <li>See full diff in <a href="002fdce3c6...6c439dc8bd">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2025-07-01 15:39:12 +01:00
dependabot[bot]	48c0112b87	chore(deps): bump github/codeql-action from 3.29.0 to 3.29.2 (#3848) ... Bumps [github/codeql-action](https://github.com/github/codeql-action) from 3.29.0 to 3.29.2. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/github/codeql-action/releases">github/codeql-action's releases</a>.</em></p> <blockquote> <h2>v3.29.2</h2> <h1>CodeQL Action Changelog</h1> <p>See the <a href="https://github.com/github/codeql-action/releases">releases page</a> for the relevant changes to the CodeQL CLI and language packs.</p> <h2>3.29.2 - 30 Jun 2025</h2> <ul> <li>Experimental: When the <code>quality-queries</code> input for the <code>init</code> action is provided with an argument, separate <code>.quality.sarif</code> files are produced and uploaded for each language with the results of the specified queries. Do not use this in production as it is part of an internal experiment and subject to change at any time. <a href="https://redirect.github.com/github/codeql-action/pull/2935">#2935</a></li> </ul> <p>See the full <a href="https://github.com/github/codeql-action/blob/v3.29.2/CHANGELOG.md">CHANGELOG.md</a> for more information.</p> <h2>v3.29.1</h2> <h1>CodeQL Action Changelog</h1> <p>See the <a href="https://github.com/github/codeql-action/releases">releases page</a> for the relevant changes to the CodeQL CLI and language packs.</p> <h2>3.29.1 - 27 Jun 2025</h2> <ul> <li>Fix bug in PR analysis where user-provided <code>include</code> query filter fails to exclude non-included queries. <a href="https://redirect.github.com/github/codeql-action/pull/2938">#2938</a></li> <li>Update default CodeQL bundle version to 2.22.1. <a href="https://redirect.github.com/github/codeql-action/pull/2950">#2950</a></li> </ul> <p>See the full <a href="https://github.com/github/codeql-action/blob/v3.29.1/CHANGELOG.md">CHANGELOG.md</a> for more information.</p> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/github/codeql-action/blob/main/CHANGELOG.md">github/codeql-action's changelog</a>.</em></p> <blockquote> <h1>CodeQL Action Changelog</h1> <p>See the <a href="https://github.com/github/codeql-action/releases">releases page</a> for the relevant changes to the CodeQL CLI and language packs.</p> <h2>[UNRELEASED]</h2> <p>No user facing changes.</p> <h2>3.29.2 - 30 Jun 2025</h2> <ul> <li>Experimental: When the <code>quality-queries</code> input for the <code>init</code> action is provided with an argument, separate <code>.quality.sarif</code> files are produced and uploaded for each language with the results of the specified queries. Do not use this in production as it is part of an internal experiment and subject to change at any time. <a href="https://redirect.github.com/github/codeql-action/pull/2935">#2935</a></li> </ul> <h2>3.29.1 - 27 Jun 2025</h2> <ul> <li>Fix bug in PR analysis where user-provided <code>include</code> query filter fails to exclude non-included queries. <a href="https://redirect.github.com/github/codeql-action/pull/2938">#2938</a></li> <li>Update default CodeQL bundle version to 2.22.1. <a href="https://redirect.github.com/github/codeql-action/pull/2950">#2950</a></li> </ul> <h2>3.29.0 - 11 Jun 2025</h2> <ul> <li>Update default CodeQL bundle version to 2.22.0. <a href="https://redirect.github.com/github/codeql-action/pull/2925">#2925</a></li> <li>Bump minimum CodeQL bundle version to 2.16.6. <a href="https://redirect.github.com/github/codeql-action/pull/2912">#2912</a></li> </ul> <h2>3.28.19 - 03 Jun 2025</h2> <ul> <li>The CodeQL Action no longer includes its own copy of the extractor for the <code>actions</code> language, which is currently in public preview. The <code>actions</code> extractor has been included in the CodeQL CLI since v2.20.6. If your workflow has enabled the <code>actions</code> language <em>and</em> you have pinned your <code>tools:</code> property to a specific version of the CodeQL CLI earlier than v2.20.6, you will need to update to at least CodeQL v2.20.6 or disable <code>actions</code> analysis.</li> <li>Update default CodeQL bundle version to 2.21.4. <a href="https://redirect.github.com/github/codeql-action/pull/2910">#2910</a></li> </ul> <h2>3.28.18 - 16 May 2025</h2> <ul> <li>Update default CodeQL bundle version to 2.21.3. <a href="https://redirect.github.com/github/codeql-action/pull/2893">#2893</a></li> <li>Skip validating SARIF produced by CodeQL for improved performance. <a href="https://redirect.github.com/github/codeql-action/pull/2894">#2894</a></li> <li>The number of threads and amount of RAM used by CodeQL can now be set via the <code>CODEQL_THREADS</code> and <code>CODEQL_RAM</code> runner environment variables. If set, these environment variables override the <code>threads</code> and <code>ram</code> inputs respectively. <a href="https://redirect.github.com/github/codeql-action/pull/2891">#2891</a></li> </ul> <h2>3.28.17 - 02 May 2025</h2> <ul> <li>Update default CodeQL bundle version to 2.21.2. <a href="https://redirect.github.com/github/codeql-action/pull/2872">#2872</a></li> </ul> <h2>3.28.16 - 23 Apr 2025</h2> <ul> <li>Update default CodeQL bundle version to 2.21.1. <a href="https://redirect.github.com/github/codeql-action/pull/2863">#2863</a></li> </ul> <h2>3.28.15 - 07 Apr 2025</h2> <ul> <li>Fix bug where the action would fail if it tried to produce a debug artifact with more than 65535 files. <a href="https://redirect.github.com/github/codeql-action/pull/2842">#2842</a></li> </ul> <h2>3.28.14 - 07 Apr 2025</h2> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="181d5eefc2"><code>181d5ee</code></a> Merge pull request <a href="https://redirect.github.com/github/codeql-action/issues/2957">#2957</a> from github/update-v3.29.2-4c57370d0</li> <li><a href="c77386a9db"><code>c77386a</code></a> Fix changelog PR number</li> <li><a href="8d43d4ecec"><code>8d43d4e</code></a> Update changelog for v3.29.2</li> <li><a href="4c57370d03"><code>4c57370</code></a> Merge pull request <a href="https://redirect.github.com/github/codeql-action/issues/2935">#2935</a> from github/mbg/interpret-cq-results</li> <li><a href="2830b750e5"><code>2830b75</code></a> Add changelog entry</li> <li><a href="aa72ddaead"><code>aa72dda</code></a> Merge branch 'main' into mbg/interpret-cq-results</li> <li><a href="65d1e45f0b"><code>65d1e45</code></a> Rename <code>SARIF_UPLOAD_ENDPOINT</code> members</li> <li><a href="362ebf85da"><code>362ebf8</code></a> Check both SARIF files in <code>quality-queries.yml</code> test</li> <li><a href="10a3e4b17d"><code>10a3e4b</code></a> Fix formatting</li> <li><a href="8593ea65e2"><code>8593ea6</code></a> Merge pull request <a href="https://redirect.github.com/github/codeql-action/issues/2954">#2954</a> from github/mergeback/v3.29.1-to-main-39edc492</li> <li>Additional commits viewable in <a href="ce28f5bb42...181d5eefc2">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2025-07-01 15:39:07 +01:00
Anthony Stirling	df88b01b5d	restore OCRMyPDF and ghostscript compression (#3846) ... # Description of Changes This pull request introduces enhancements to tool dependencies, endpoint configurations, and Dockerfile packages. The changes primarily focus on adding support for new tools (Ghostscript and OCRmyPDF), improving endpoint management, and refining dependency checks. Below is a summary of the most important changes grouped by theme: ### Tool Integration and Dependency Management: * Added support for Ghostscript and OCRmyPDF in the session limits and timeout configurations (`ApplicationProperties.java`). [[1]](diffhunk://#diff-0642cd5c54d57a80f1f9c26cb26677f58778dc889cb59ebfc07b7512e74a8886R548-R549) [[2]](diffhunk://#diff-0642cd5c54d57a80f1f9c26cb26677f58778dc889cb59ebfc07b7512e74a8886R582-R589) [[3]](diffhunk://#diff-0642cd5c54d57a80f1f9c26cb26677f58778dc889cb59ebfc07b7512e74a8886R602-R603) [[4]](diffhunk://#diff-0642cd5c54d57a80f1f9c26cb26677f58778dc889cb59ebfc07b7512e74a8886R636-R643) * Updated `Processes` enum and `ProcessExecutor` logic to include Ghostscript and OCRmyPDF, enabling their session limits and timeout handling. [[1]](diffhunk://#diff-b0afb37bdac8b0f1a10aca87b0244b133ac9b05518088b6f4c6c2bf48f859fdaR87-R96) [[2]](diffhunk://#diff-b0afb37bdac8b0f1a10aca87b0244b133ac9b05518088b6f4c6c2bf48f859fdaR141-R150) [[3]](diffhunk://#diff-b0afb37bdac8b0f1a10aca87b0244b133ac9b05518088b6f4c6c2bf48f859fdaL281-R303) * Integrated Ghostscript and OCRmyPDF into the external dependency check mechanism (`ExternalAppDepConfig.java`). [[1]](diffhunk://#diff-511713d04e0545670bfb44e70e84235288e91db0ef219e423628746f28e67cfcR37-R38) [[2]](diffhunk://#diff-511713d04e0545670bfb44e70e84235288e91db0ef219e423628746f28e67cfcR114-R115) ### Endpoint Configuration Enhancements: * Improved endpoint management by introducing functional group overrides, tool group fallbacks, and alternative tool group handling (`EndpointConfiguration.java`). [[1]](diffhunk://#diff-d6f76bfe88b1a7f347c10cc6956f8e7874b66772c6ac0ac432bedd3c7e8c372dR24-R25) [[2]](diffhunk://#diff-d6f76bfe88b1a7f347c10cc6956f8e7874b66772c6ac0ac432bedd3c7e8c372dR39-R178) [[3]](diffhunk://#diff-d6f76bfe88b1a7f347c10cc6956f8e7874b66772c6ac0ac432bedd3c7e8c372dL264-R357) [[4]](diffhunk://#diff-d6f76bfe88b1a7f347c10cc6956f8e7874b66772c6ac0ac432bedd3c7e8c372dR399-R437) * Added new endpoint groups and alternatives for multi-tool endpoints like "repair," "compress-pdf," and "ocr-pdf," supporting both Ghostscript and OCRmyPDF. [[1]](diffhunk://#diff-d6f76bfe88b1a7f347c10cc6956f8e7874b66772c6ac0ac432bedd3c7e8c372dL215-L216) [[2]](diffhunk://#diff-d6f76bfe88b1a7f347c10cc6956f8e7874b66772c6ac0ac432bedd3c7e8c372dL264-R357) ### Dockerfile Updates: * Removed `qpdf` and added `unpaper` and `ocrmypdf` to the package list in `Dockerfile` and `Dockerfile.fat` to enable advanced OCR and PDF manipulation features. [[1]](diffhunk://#diff-dd2c0eb6ea5cfc6c4bd4eac30934e2d5746747af48fef6da689e85b752f39557L54) [[2]](diffhunk://#diff-dd2c0eb6ea5cfc6c4bd4eac30934e2d5746747af48fef6da689e85b752f39557R71-R75) [[3]](diffhunk://#diff-571631582b988e88c52c86960cc083b0b8fa63cf88f056f26e9e684195221c27L79-R89) ### Code Cleanup and Refactoring: * Refactored `TempFileRegistry` to improve readability by simplifying variable initialization. [[1]](diffhunk://#diff-ed08845255ade38ea6e28a959ed967957611025fb7f8f5dcf4543b5f200a5fecL12) [[2]](diffhunk://#diff-ed08845255ade38ea6e28a959ed967957611025fb7f8f5dcf4543b5f200a5fecL30-R29) * Updated `CompressController` to dynamically check tool group availability using the new endpoint configuration logic. [[1]](diffhunk://#diff-fc8dc1845d34077a089d9265521ce8c8d6104a8b79137e1de5310e30ffb0348aR50) [[2]](diffhunk://#diff-fc8dc1845d34077a089d9265521ce8c8d6104a8b79137e1de5310e30ffb0348aR65-R76) These changes collectively enhance the application's capabilities for PDF processing, improve dependency management, and streamline endpoint handling. --- ## Checklist ### General - [ ] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [ ] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [ ] I have performed a self-review of my own code - [ ] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-07-01 14:50:56 +01:00
Ludy	ee0426fa18	refactor: replace deprecated fields() with propertyStream() in ApiDocService (#3838) ... # Description of Changes - Replaced usage of the deprecated `fields()` method on `JsonNode` with `propertyStream()` in `ApiDocService`. - This change ensures compatibility with future Jackson versions and avoids deprecation warnings. --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-30 22:32:30 +01:00
dmiljk	2ad25d43a0	Updated Serbian translation and ignore list (#3844) ... This PR completes the Serbian translation file (`messages_sr_LATN_RS.properties`) to 100%, as of this moment. Also updated `ignore_translation.toml` to reflect which lines should be skipped during validation. Please deploy the test instance as mentioned. Thanks! --- ## Checklist ### General - [ ] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [ ] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [ ] I have performed a self-review of my own code - [ ] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details. --------- Co-authored-by: root <root@ubuntu-22.bxy.rs>	2025-06-30 22:31:53 +01:00
Balázs Szücs	11e3ccd19f	feat: add Thai language option for stamp feature (#3825) ... # Description of Changes This pull request adds support for Thai language text stamps in the `StampController` and updates the corresponding HTML template to include Thai as an option in the language selection dropdown. ### Thai language support: * [`stirling-pdf/src/main/java/stirling/software/SPDF/controller/api/misc/StampController.java`](diffhunk://#diff-1fc63d07188744082edc3780d43868119bf9876868c8c8db6ce324b57c60284eR184-R186): Added a case for "thai" in the `addTextStamp` method, specifying the font file `NotoSansThai-Regular.ttf` for Thai language support. * [`stirling-pdf/src/main/resources/templates/misc/stamp.html`](diffhunk://#diff-29cf511e86ebd2b1d4f378e4f0bd301aa5e024e6dc66f93672206c2b1ffa526cR91): Added a new `<option>` for Thai language ("ไทย") in the dropdown menu for language selection. ### Preview:  [dummy_stamped.pdf](https://github.com/user-attachments/files/20910418/dummy_stamped.pdf) --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [x] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [x] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-25 23:24:26 +01:00
Balázs Szücs	2177eff6c4	Added mockTempFileManager to tests in EML-to-PDF mockito to resolve errors (#3826) ... # Description of Changes Resolving conflict that comes from conflicts between #3797 and #3806 #3797 modified the code: - The convertEmlToPdf and convertHtmlToPdf methods now require a TempFileManager tempFileManager argument. - All code (including tests) that calls these methods must now provide a valid TempFileManager instance. After that however, #3806 did not account for these changes, specifically the changes to the required arguments. --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [x] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-25 23:01:12 +01:00
Ludy	06f792aa70	chore: include additional problem reports folder in upload-artifact step (#3805) ... # Description of Changes --- ## Checklist ### General - [ ] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [ ] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [ ] I have performed a self-review of my own code - [ ] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-25 18:54:05 +01:00
Balázs Szücs	212d4d0dcb	feat: add Thai language support and corresponding font for watermarking (#3819) ... # Description of Changes This pull request adds support for Thai language in the watermark functionality. ### Backend updates: * [`stirling-pdf/src/main/java/stirling/software/SPDF/controller/api/security/WatermarkController.java`](diffhunk://#diff-73e8448c42af57bb0549146473b5e7edc063533694813dfda7214e51005a90daR173-R175): Added a new case for "thai" in the `addTextWatermark` method to use the `NotoSansThai-Regular.ttf` font for Thai text. ### Frontend updates: * [`stirling-pdf/src/main/resources/templates/security/add-watermark.html`](diffhunk://#diff-dc75a6b50ba2a29c6cb17f0cfa65e4ffac88102d5834ea40fc9d9b3b4d00f8f3R41): Added a new option for Thai language (`ไทย`) in the language dropdown menu for watermark customization.  ### Sample PDF:  [dummy_watermarked.pdf](https://github.com/user-attachments/files/20903700/dummy_watermarked.pdf) Closes #3810 --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [x] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [x] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-25 18:53:01 +01:00
Ludy	1e17242023	chore: update Docker Compose to v2.37.2 in GitHub Actions workflow (#3803) ... # Description of Changes - **What was changed**: Updated the Docker Compose version in the GitHub Actions `build.yml` from `v2.32.4` to `v2.37.2`. - **Why the change was made**: To benefit from the latest fixes and internal improvements introduced in `v2.37.2`, including: - Added support for `use_api_socket` - Fixed container name output in `images --json` - Prevented panic on `w` shortcut usage without watch support - Internal restructuring of `run` logic - Dependency updates (`compose-go v2.6.5`, `containerd v2.1.2`) See: https://github.com/docker/compose/releases --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [ ] I have performed a self-review of my own code - [ ] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-25 18:34:17 +01:00
Balázs Szücs	6461b93131	feat: add JUnit tests for EML to PDF conversion (#3806) ... # Description of Changes This PR introduces tests for EML-to-PDF feature, but indirectly tests also HTML-to-PDF as well as Attachments feature. - Adds JUnit tests for EML-to-PDF conversion, including scenarios with file attachments, multipart, complex, CSS styled etc.. emails. - Confirms that adding Angus Mail as a runtime dependency does not introduce any issues or regressions. PR is relevant after #3781 --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [x] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-25 18:33:50 +01:00
Anthony Stirling	bc9c127819	feat:centralise temp-file management & cleanup across app/docker (#3797) ... # Description of Changes Introduces TempFileManager, registry, and scheduled cleanup service; aligns all Docker images and runtime scripts to use a dedicated /tmp/stirling-pdf directory; updates controllers, utilities, and tests to use the new API; adds configurable system.tempFileManagement section. Closes #(issue_number) --- ## Checklist ### General - [ ] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [ ] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [ ] I have performed a self-review of my own code - [ ] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details. --------- Co-authored-by: a <a>	2025-06-25 18:32:28 +01:00
Dario Ghunney Ware	32aa568196	Add Attachments Feature (#3781) ... # Description of Changes Added a new feature to add attachments to a PDF document. ### Added: - `AttachmentController`: Endpoint for adding attachments at `/add-attachments` with parameters `fileInput` for the PDF and `attachments` as a list of files to attach - `AttachmentServiceInterface` - `AttachmentService`: Handles the logic of adding attachments to the PDF - `AttachmentUtils`: to handle setting the catalog viewer preferences in the viewer - Add Attachments page - Tests for new feature ### Changes: - `EmlToPdf`: Moved setting of viewer preferences to `AttachmentUtils` - `EndpointConfiguration: Included '/add-attachments' - Updated language files with attachments copy - General clean up Closes #1259 --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [x] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [x] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [x] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable)     - [x] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [x] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-24 23:52:17 +01:00
Anthony Stirling	8e8f0492c4	Update repo_devs.json	2025-06-23 23:24:31 +01:00
Ludy	f01ad11843	chore: improve editor configuration, pre-commit hooks, and VSCode settings (#3780) ... # Description of Changes - Added `charset = utf-8` and defined `indent_size = 2` for `*.css`, `*.json`, `*.jsonc`, and `*.yml` in `.editorconfig` to ensure consistent formatting across file types. - Improved labeler rules in `.github/labeler-config-srvaroa.yml` by expanding path coverage for labeling Java and CI-related files. - Upgraded pre-commit hooks: - `ruff` from `v0.11.11` to `v0.12.0` - `gitleaks` from `v8.26.0` to `v8.27.2` - Updated `codespell` args to ignore new terms like `thirdParty`, `tabEl`, `tabEls`. - Enhanced `.vscode/settings.json` and `extensions.json`: - Added formatting rules for `json`, `jsonc`, `markdown`, `python`, and `gradle` files. - Included additional extensions for Markdown and Gradle. - Applied detailed HTML formatting preferences. --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details. --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-23 23:15:05 +01:00
Ludy	21875d7052	feat: add automated PR title review using GitHub Actions and AI (#3784) ... # Description of Changes - Added a new GitHub Actions workflow `.github/workflows/ai_pr_title_review.yml` to perform AI-powered PR title evaluations - Introduced configuration files: - `.github/config/repo_devs.json` to define trusted developers - `.github/config/system-prompt.txt` as the system prompt for the AI model - Workflow checks the PR actor against the `repo_devs.json` list and evaluates the PR title if the actor is a listed developer - Integrates GPT-4o via `actions/ai-inference` to analyze diffs and suggest improved PR titles in JSON - Posts a suggestion comment or praise, depending on AI rating, using `github-script` - Supports secure repo setup with hardened runners and tokenized GitHub App bot access --- ## Checklist ### General - [ ] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [ ] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [ ] I have performed a self-review of my own code - [ ] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details. --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-23 23:05:54 +01:00
Ludy	fe553c7173	ci: add cleanup step to remove temporary files in workflow (#3782) ... # Description of Changes # Description of Changes - Added a new step `Cleanup temporary files` at the end of the `check_properties.yml` GitHub Actions workflow. - This step ensures temporary files such as `pr-branch`, `.properties` comparison files, and result artifacts are deleted after the job. - The `continue-on-error: true` flag guarantees cleanup runs even if previous steps fail. This change helps prevent workspace clutter and reduces disk usage in CI runs. --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-23 23:05:38 +01:00
stirlingbot[bot]	80b5097532	Update 3rd Party Licenses (#3795) ... Auto-generated by stirlingbot[bot] Signed-off-by: stirlingbot[bot] <stirlingbot[bot]@users.noreply.github.com> Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>	2025-06-23 15:06:37 +01:00
stirlingbot[bot]	1fc552c2c7	🌐 Sync Translations + Update README Progress Table (#3796) ... ### Description of Changes This Pull Request was automatically generated to synchronize updates to translation files and documentation. Below are the details of the changes made: #### **1. Synchronization of Translation Files** - Updated translation files (`messages_*.properties`) to reflect changes in the reference file `messages_en_GB.properties`. - Ensured consistency and synchronization across all supported language files. - Highlighted any missing or incomplete translations. #### **2. Update README.md** - Generated the translation progress table in `README.md`. - Added a summary of the current translation status for all supported languages. - Included up-to-date statistics on translation coverage. #### **Why these changes are necessary** - Keeps translation files aligned with the latest reference updates. - Ensures the documentation reflects the current translation progress. --- Auto-generated by [create-pull-request][1]. [1]: https://github.com/peter-evans/create-pull-request --------- Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>	2025-06-23 15:06:01 +01:00
dogukansahil	fca1ea2cbe	Improve Turkish translations for Fake Scan, TOC, and Cookie Banner (#3783) ... # Description of Changes Added and refined Turkish translations for the following sections: - Fake Scan tool - Table of Contents editing interface - Cookie Banner and Preferences modal - Audit Dashboard (events, export, status) - Team and user management Changes focused on: - Improving clarity and user-friendliness - Ensuring consistency across UI terms - Aligning with existing translation tone and terminology Most keys were updated or reworded, and several new strings were translated for recently added features. No functional code was changed. Only the `messages_tr_TR.properties` file was modified. --- Closes # (optional – if linked to an issue) ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) - [x] I have performed a self-review of my own translation - [x] My changes generate no new warnings ### Documentation - [x] I have followed the [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) section ### UI Changes (if applicable) - [ ] No UI changes were made, only i18n text updated ### Testing - [x] Translations were verified by reviewing the .properties file in context	2025-06-23 14:10:55 +01:00
dependabot[bot]	cc3aa6b703	Bump org.springframework.boot:spring-boot-dependencies from 3.5.0 to 3.5.3 (#3787) ... [//]: # (dependabot-start) ⚠️ **Dependabot is rebasing this PR** ⚠️ Rebasing might not happen immediately, so don't worry if this takes some time. Note: if you make any changes to this PR yourself, they will take precedence over the rebase. --- [//]: # (dependabot-end) Bumps [org.springframework.boot:spring-boot-dependencies](https://github.com/spring-projects/spring-boot) from 3.5.0 to 3.5.3. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/spring-projects/spring-boot/releases">org.springframework.boot:spring-boot-dependencies's releases</a>.</em></p> <blockquote> <h2>v3.5.3</h2> <h2>🐞 Bug Fixes</h2> <ul> <li>Binder context does not restore previous source causing missing data on Spring Boot 3.5 or above <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46040">#46040</a></li> </ul> <h2>v3.5.2</h2> <h2>🐞 Bug Fixes</h2> <ul> <li>IllegalArgumentException: 'name' must not be null thrown when property source filtering applied twice <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46032">#46032</a></li> </ul> <h2>v3.5.1</h2> <h2>⚠️ Noteworthy Changes</h2> <ul> <li>This release <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45872">upgrades to Tomcat 10.1.42</a> which has introduced limits for part count and header size in <code>multipart/form-data</code> requests. These limits can be customized using <code>server.tomcat.max-part-count</code> and <code>server.tomcat.max-part-header-size</code> respectively.</li> </ul> <h2>⭐ New Features</h2> <ul> <li>Allow Specifying ConfigData.Options On ConfigDataEnvironmentContributors <a href="https://redirect.github.com/spring-projects/spring-boot/issues/42932">#42932</a></li> </ul> <h2>🐞 Bug Fixes</h2> <ul> <li>Executable JAR application class encounters performance issues when classpath URLs reference a host <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46028">#46028</a></li> <li>Loading from spring.factories may fail with a ClassNotFoundException when the TCCL changes between calls <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46019">#46019</a></li> <li>spring.couchbase.authentication.jks.private-key-password has no effect <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46006">#46006</a></li> <li>Actuator heapdump endpoint is failing on modern OpenJ9 JVMs <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46005">#46005</a></li> <li>UnboundConfigurationPropertiesException is no longer thrown from IndexedElementsBinder <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45994">#45994</a></li> <li>DataSouceBuilder can fail with a NPE when the driver is null <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45992">#45992</a></li> <li>JSON writer incorrectly escapes forward slash which can cause structure logging issues <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45980">#45980</a></li> <li>ManagementContextAutoConfiguration adds a property source that degrades binding performance <a href="https://redirect.github.com/spring-projects/spring-boot/pull/45968">#45968</a></li> <li>ClientHttpConnectorAutoConfiguration fails to load when 'java.net.http.HttpClient' is unavailable <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45955">#45955</a></li> <li>It is not possible to opt-out of profile validation or use profile names that contain '.' <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45947">#45947</a></li> <li>GraphQlProperties.DeprecatedSse is not annotated as deprecated <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45878">#45878</a></li> <li>SpringApplication.setEnvironmentPrefix is ignored when reading MANAGEMENT_SERVER_PORT <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45857">#45857</a></li> <li>Write and delete operations no longer work in the Cloud Foundry actuator support with Spring Security due to CSRF protection <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45848">#45848</a></li> <li>ConditionalOnAvailableEndpoint does not use the ConditionContext's ClassLoader to load exposure outcome contributors <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45803">#45803</a></li> <li>Binding no longer works with sytem environment properties that are not upper case <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45741">#45741</a></li> <li>ManagementWebServerFactoryCustomizer and ManagementErrorPageCustomizer should not have the same order <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45736">#45736</a></li> <li>Default version of Awailitility is not compatible with Kotlin 1.9 baseline <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45673">#45673</a></li> <li>Spring Boot 3.5's dependency management should have been upgraded to Lettuce 6.6.0.RELEASE <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45670">#45670</a></li> <li>Spring Boot 3.5's dependency management should have been upgraded to Jedis 6.0.0 <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45669">#45669</a></li> <li>SAML2 autoconfiguration is not imported by <code>@WebMvcTest</code> <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45666">#45666</a></li> <li>Spring Boot 3.5's dependency management should have been upgraded to MongoDB 5.5.0 <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45660">#45660</a></li> </ul> <h2>📔 Documentation</h2> <ul> <li>Fix Docker security options links in Packaging OCI images sections <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46021">#46021</a></li> <li>Improve documentation for configuring Spring Security with '/error' <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46009">#46009</a></li> <li>Timestamps in Retrieving Audit Events examples do not match the accompanying text <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45997">#45997</a></li> <li>Add SSL response structure to actuator info endpoint documentation <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45921">#45921</a></li> <li>Update javadoc of test slice annotations to suggest MockitoBean rather than MockBean <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45915">#45915</a></li> <li>Include configuration classes from all modules in the &quot;Auto-configuration Classes&quot; appendix <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45863">#45863</a></li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="0ec7194fc1"><code>0ec7194</code></a> Release v3.5.3</li> <li><a href="18e5e0647d"><code>18e5e06</code></a> Merge branch '3.4.x'</li> <li><a href="cb9cf45b7f"><code>cb9cf45</code></a> Restore previous source in Context.withSource calls</li> <li><a href="01a23c3d20"><code>01a23c3</code></a> Next development version (v3.5.3-SNAPSHOT)</li> <li><a href="7b553d9093"><code>7b553d9</code></a> Protect against null names when filter is applied more than once</li> <li><a href="440ea79df1"><code>440ea79</code></a> Next development version (v3.5.2-SNAPSHOT)</li> <li><a href="a816518679"><code>a816518</code></a> Merge branch '3.4.x'</li> <li><a href="05906cc047"><code>05906cc</code></a> Next development version (v3.4.8-SNAPSHOT)</li> <li><a href="74fe4adcaf"><code>74fe4ad</code></a> Upgrade to HttpClient5 5.5</li> <li><a href="98632a1f48"><code>98632a1</code></a> Merge branch '3.4.x'</li> <li>Additional commits viewable in <a href="https://github.com/spring-projects/spring-boot/compare/v3.5.0...v3.5.3">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2025-06-23 14:09:02 +01:00
dependabot[bot]	077962872e	Bump org.springframework.boot from 3.5.0 to 3.5.3 (#3788) ... Bumps [org.springframework.boot](https://github.com/spring-projects/spring-boot) from 3.5.0 to 3.5.3. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/spring-projects/spring-boot/releases">org.springframework.boot's releases</a>.</em></p> <blockquote> <h2>v3.5.3</h2> <h2>🐞 Bug Fixes</h2> <ul> <li>Binder context does not restore previous source causing missing data on Spring Boot 3.5 or above <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46040">#46040</a></li> </ul> <h2>v3.5.2</h2> <h2>🐞 Bug Fixes</h2> <ul> <li>IllegalArgumentException: 'name' must not be null thrown when property source filtering applied twice <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46032">#46032</a></li> </ul> <h2>v3.5.1</h2> <h2>⚠️ Noteworthy Changes</h2> <ul> <li>This release <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45872">upgrades to Tomcat 10.1.42</a> which has introduced limits for part count and header size in <code>multipart/form-data</code> requests. These limits can be customized using <code>server.tomcat.max-part-count</code> and <code>server.tomcat.max-part-header-size</code> respectively.</li> </ul> <h2>⭐ New Features</h2> <ul> <li>Allow Specifying ConfigData.Options On ConfigDataEnvironmentContributors <a href="https://redirect.github.com/spring-projects/spring-boot/issues/42932">#42932</a></li> </ul> <h2>🐞 Bug Fixes</h2> <ul> <li>Executable JAR application class encounters performance issues when classpath URLs reference a host <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46028">#46028</a></li> <li>Loading from spring.factories may fail with a ClassNotFoundException when the TCCL changes between calls <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46019">#46019</a></li> <li>spring.couchbase.authentication.jks.private-key-password has no effect <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46006">#46006</a></li> <li>Actuator heapdump endpoint is failing on modern OpenJ9 JVMs <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46005">#46005</a></li> <li>UnboundConfigurationPropertiesException is no longer thrown from IndexedElementsBinder <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45994">#45994</a></li> <li>DataSouceBuilder can fail with a NPE when the driver is null <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45992">#45992</a></li> <li>JSON writer incorrectly escapes forward slash which can cause structure logging issues <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45980">#45980</a></li> <li>ManagementContextAutoConfiguration adds a property source that degrades binding performance <a href="https://redirect.github.com/spring-projects/spring-boot/pull/45968">#45968</a></li> <li>ClientHttpConnectorAutoConfiguration fails to load when 'java.net.http.HttpClient' is unavailable <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45955">#45955</a></li> <li>It is not possible to opt-out of profile validation or use profile names that contain '.' <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45947">#45947</a></li> <li>GraphQlProperties.DeprecatedSse is not annotated as deprecated <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45878">#45878</a></li> <li>SpringApplication.setEnvironmentPrefix is ignored when reading MANAGEMENT_SERVER_PORT <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45857">#45857</a></li> <li>Write and delete operations no longer work in the Cloud Foundry actuator support with Spring Security due to CSRF protection <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45848">#45848</a></li> <li>ConditionalOnAvailableEndpoint does not use the ConditionContext's ClassLoader to load exposure outcome contributors <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45803">#45803</a></li> <li>Binding no longer works with sytem environment properties that are not upper case <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45741">#45741</a></li> <li>ManagementWebServerFactoryCustomizer and ManagementErrorPageCustomizer should not have the same order <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45736">#45736</a></li> <li>Default version of Awailitility is not compatible with Kotlin 1.9 baseline <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45673">#45673</a></li> <li>Spring Boot 3.5's dependency management should have been upgraded to Lettuce 6.6.0.RELEASE <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45670">#45670</a></li> <li>Spring Boot 3.5's dependency management should have been upgraded to Jedis 6.0.0 <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45669">#45669</a></li> <li>SAML2 autoconfiguration is not imported by <code>@WebMvcTest</code> <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45666">#45666</a></li> <li>Spring Boot 3.5's dependency management should have been upgraded to MongoDB 5.5.0 <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45660">#45660</a></li> </ul> <h2>📔 Documentation</h2> <ul> <li>Fix Docker security options links in Packaging OCI images sections <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46021">#46021</a></li> <li>Improve documentation for configuring Spring Security with '/error' <a href="https://redirect.github.com/spring-projects/spring-boot/issues/46009">#46009</a></li> <li>Timestamps in Retrieving Audit Events examples do not match the accompanying text <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45997">#45997</a></li> <li>Add SSL response structure to actuator info endpoint documentation <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45921">#45921</a></li> <li>Update javadoc of test slice annotations to suggest MockitoBean rather than MockBean <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45915">#45915</a></li> <li>Include configuration classes from all modules in the &quot;Auto-configuration Classes&quot; appendix <a href="https://redirect.github.com/spring-projects/spring-boot/issues/45863">#45863</a></li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="0ec7194fc1"><code>0ec7194</code></a> Release v3.5.3</li> <li><a href="18e5e0647d"><code>18e5e06</code></a> Merge branch '3.4.x'</li> <li><a href="cb9cf45b7f"><code>cb9cf45</code></a> Restore previous source in Context.withSource calls</li> <li><a href="01a23c3d20"><code>01a23c3</code></a> Next development version (v3.5.3-SNAPSHOT)</li> <li><a href="7b553d9093"><code>7b553d9</code></a> Protect against null names when filter is applied more than once</li> <li><a href="440ea79df1"><code>440ea79</code></a> Next development version (v3.5.2-SNAPSHOT)</li> <li><a href="a816518679"><code>a816518</code></a> Merge branch '3.4.x'</li> <li><a href="05906cc047"><code>05906cc</code></a> Next development version (v3.4.8-SNAPSHOT)</li> <li><a href="74fe4adcaf"><code>74fe4ad</code></a> Upgrade to HttpClient5 5.5</li> <li><a href="98632a1f48"><code>98632a1</code></a> Merge branch '3.4.x'</li> <li>Additional commits viewable in <a href="https://github.com/spring-projects/spring-boot/compare/v3.5.0...v3.5.3">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2025-06-23 14:08:32 +01:00
dependabot[bot]	76808b716a	Bump docker/setup-buildx-action from 3.11.0 to 3.11.1 (#3790) ... Bumps [docker/setup-buildx-action](https://github.com/docker/setup-buildx-action) from 3.11.0 to 3.11.1. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/docker/setup-buildx-action/releases">docker/setup-buildx-action's releases</a>.</em></p> <blockquote> <h2>v3.11.1</h2> <ul> <li>Fix <code>keep-state</code> not being respected by <a href="https://github.com/crazy-max"><code>@​crazy-max</code></a> in <a href="https://redirect.github.com/docker/setup-buildx-action/pull/429">docker/setup-buildx-action#429</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/setup-buildx-action/compare/v3.11.0...v3.11.1">https://github.com/docker/setup-buildx-action/compare/v3.11.0...v3.11.1</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="e468171a9d"><code>e468171</code></a> Merge pull request <a href="https://redirect.github.com/docker/setup-buildx-action/issues/429">#429</a> from crazy-max/fix-keep-state</li> <li><a href="a3e7502fd0"><code>a3e7502</code></a> chore: update generated content</li> <li><a href="b145473295"><code>b145473</code></a> fix keep-state not being respected</li> <li>See full diff in <a href="18ce135bb5...e468171a9d">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2025-06-23 14:08:20 +01:00
dependabot[bot]	96315ee76f	Bump sigstore/cosign-installer from 3.8.2 to 3.9.0 (#3792) ... Bumps [sigstore/cosign-installer](https://github.com/sigstore/cosign-installer) from 3.8.2 to 3.9.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/sigstore/cosign-installer/releases">sigstore/cosign-installer's releases</a>.</em></p> <blockquote> <h2>v3.9.0</h2> <h2>What's Changed</h2> <ul> <li>Bump actions/setup-go from 5.4.0 to 5.5.0 by <a href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a href="https://redirect.github.com/sigstore/cosign-installer/pull/189">sigstore/cosign-installer#189</a></li> <li>bump cosign install to use release v2.5.0 as default by <a href="https://github.com/cpanato"><code>@​cpanato</code></a> in <a href="https://redirect.github.com/sigstore/cosign-installer/pull/191">sigstore/cosign-installer#191</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/sigstore/cosign-installer/compare/v3...v3.9.0">https://github.com/sigstore/cosign-installer/compare/v3...v3.9.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="fb28c2b633"><code>fb28c2b</code></a> bump cosign install to use release v2.5.0 as default (<a href="https://redirect.github.com/sigstore/cosign-installer/issues/191">#191</a>)</li> <li><a href="e9a05e6d32"><code>e9a05e6</code></a> Bump actions/setup-go from 5.4.0 to 5.5.0 (<a href="https://redirect.github.com/sigstore/cosign-installer/issues/189">#189</a>)</li> <li>See full diff in <a href="3454372f43...fb28c2b633">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2025-06-23 14:08:06 +01:00
Anthony Stirling	7d7f1272e4	Async (#3773) ... # Description of Changes This pull request introduces a job management system with enhanced capabilities for handling asynchronous tasks, file operations, and progress tracking. Key changes include the addition of new annotations and aspects for job execution, file management services, and models for job progress and results. ### Job Execution Enhancements: * [`common/src/main/java/stirling/software/common/annotations/AutoJobPostMapping.java`](diffhunk://#diff-570304f67b974d5bd30a28d05d34759b86bcb4a35148d779e2b46904e8dd2904R1-R47): Added a custom annotation to simplify job handling for POST requests, including support for retries, progress tracking, and resource management. * [`common/src/main/java/stirling/software/common/aop/AutoJobAspect.java`](diffhunk://#diff-5f725b1d99dbc47dfe9b1d07f37382ca7c81d587725dc35a62c644d1a25f9869R1-R231): Implemented an aspect to integrate job execution logic, handling retries, asynchronous processing, and file management seamlessly. ### File Management: * [`common/src/main/java/stirling/software/common/service/FileStorage.java`](diffhunk://#diff-f382e12c197ad6f7c5b01b1cea912e9b141a4b4e4ab7f12baafa1b69cb112962R1-R152): Added a service for storing, retrieving, and managing files using unique IDs, enabling persistent file handling for jobs. * [`common/src/main/java/stirling/software/common/service/FileOrUploadService.java`](diffhunk://#diff-e0637404eea2b1c1413cf5f3247208a9196b14388a90a896314d3e9c2949c893R1-R78): Added utility methods for converting files to `MultipartFile` and resolving file paths. ### Job Models: * [`common/src/main/java/stirling/software/common/model/job/JobProgress.java`](diffhunk://#diff-edc765f0e32ef4cb5a03dd3badafad450336a5248221ecc27976eb692280f003R1-R15): Introduced a model to represent job progress, including completion percentage and status messages. * [`common/src/main/java/stirling/software/common/model/job/JobResult.java`](diffhunk://#diff-b34316aa0ebfd849f41086339ae0323cb5cc2066b8200c38c6a39564e17b88f3R1-R94): Added a model to encapsulate job results, supporting both file-based and object-based outcomes. * [`common/src/main/java/stirling/software/common/model/job/JobResponse.java`](diffhunk://#diff-b02e9f86d44beda10ceb66650c79d1e032acd6f6a609887fb5f5596713048ab1R1-R14): Created a model for job responses, including async execution details and job IDs. * [`common/src/main/java/stirling/software/common/model/job/JobStats.java`](diffhunk://#diff-6067e6bd9e44d9dc40419d2435fa24d6753ec51e3baf7967dbcbc1a51e95e8afR1-R43): Added a model for tracking job statistics, such as total jobs, success rates, and average processing times. ### Other Changes: * [`common/src/main/java/stirling/software/common/model/api/PDFFile.java`](diffhunk://#diff-d2419d05a852acf8f8d0bd5c3673bbdd8e385b2d5cf1d80fbd8b66691ebd2cb2L17-R24): Updated the `PDFFile` model to include a `fileId` field for server-side file references, enhancing flexibility in file handling. * [`common/build.gradle`](diffhunk://#diff-824c1e8ad11e20caed0bec7162a99779b9a4bcf1178d99fae3e39f69889f8959R31): Added the `spring-boot-starter-aop` dependency to enable aspect-oriented programming. --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: a <a>	2025-06-23 13:11:44 +01:00
stirlingbot[bot]	ee8030c1c4	🤖 format everything with pre-commit by stirlingbot (#3786) ... Auto-generated by [create-pull-request][1] with **stirlingbot** [1]: https://github.com/peter-evans/create-pull-request Signed-off-by: stirlingbot[bot] <stirlingbot[bot]@users.noreply.github.com> Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>	2025-06-23 10:36:02 +01:00
Ludy	bbaadc1822	chore: improve label matching rules in labeler config (#3779) ... # Description of Changes - Improved file pattern matching by replacing glob (`**/*`) with regex-style (`.*`) to ensure better compatibility and matching in GitHub's `labeler` action. - Added a missing `Documentation` label rule based on PR titles (`^docs:.*`). - Aligned `Documentation` file-matching rule to use regex pattern (`.*.md`). - Fixed capitalization inconsistency in the auto-labeler workflow: `licenses` → `Licenses`. --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-19 18:44:01 +01:00
Balázs Szücs	9923411ade	Eml-to-pdf bug fixes: removal of incompatible fonts, removal of emoji in favor of @, jakarta-mail dependency handling improvements (#3770) ... # Description of Changes This pull request introduces enhancements and code cleanup to the `EmlToPdf` utility class, focusing on improving email-to-PDF conversion, handling embedded images, and simplifying the codebase. Key changes include better handling of inline images, enhanced Jakarta Mail dependency checks, and refactoring for improved readability and maintainability. ### Enhancements to Email-to-PDF Conversion: * Added support for processing inline images (`cid:` references) by converting them into data URIs for proper inline display. * Improved attachment handling to always include embedded images regardless of size, ensuring inline display functionality. * Enhanced email HTML generation to process inline images and include them in the email body. ### Attachment Handling Enhancements: * Replaced the attachment icon placeholder (`icon` or 📎 emoji) with a new marker (`@`) for consistency across the application (non-fat images did not support the emoji, however @ is supported accross the board.) * Updated the annotation logic to use `AttachmentMarkerPositionFinder` instead of `EmojiPositionFinder`, aligning with the new attachment marker system. ### Jakarta Mail Dependency Handling: * Added detailed checks for core Jakarta Mail classes to determine availability in different environments (e.g., Docker). * Introduced validation for Jakarta Mail multipart and part types to prevent processing invalid objects. * Explicitly parse in the classes: - jakarta.mail.internet.MimeMessage – Core email message parsing - jakarta.mail.Session – Email session management - jakarta.mail.internet.MimeUtility – MIME encoding/decoding utilities - jakarta.mail.internet.MimePart – Individual MIME parts (attachments, body parts) - jakarta.mail.internet.MimeMultipart – Multi-part MIME messages - jakarta.mail.Multipart – Base multipart interface - jakarta.mail.Part – Base part interface ### Code Cleanup and Refactoring: * Simplified utility classes (`StyleConstants`, `MimeConstants`, `FileSizeConstants`) by removing unnecessary constructors and unused constants. * Updated log messages for clarity, such as distinguishing between general content processing errors and multipart-specific issues. --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [ ] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [x] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-19 16:18:57 +01:00
Ludy	5a8162ff60	ci: add matrix strategy for spring-security and improve test report check logic (#3768) ... # Description of Changes - Introduced a new matrix axis `spring-security` in the GitHub Actions workflow to run tests with and without Spring Security features enabled. - Removed duplicated build steps and unified them into a single Gradle task using the matrix value. - Refactored the test report check step to dynamically iterate over expected directories using a Bash array, improving maintainability and readability. - Ensured test report artifacts are uploaded regardless of test success, with clearer naming and a fallback if files are missing. --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-19 15:42:16 +01:00
Ludy	387ae5934d	chore: expand GitHub label configuration with size, language, and workflow labels (#3778) ... # Description of Changes Please provide a summary of the changes, including: - Descriptions were added for several labels to improve automation compatibility and clarity. - These enhancements facilitate clearer PR management and allow for better filtering and automation via GitHub Actions or other tooling. --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details. --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-19 15:40:26 +01:00
Adityarup Laha	9d5f97c5ad	Update multi-toolAdvert to respect SYSTEM_ROOTURIPATH. (#3776) ... Closes #3775 Currently, the advert link assumes `SYSTEM_ROOTURIPATH` to be `/`. As described in the issue, this isn't always the case. Simply removing `/` fixes the issue by taking the same approach to endpoints as `navbarEntry`. --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-19 13:53:41 +00:00
Ludy	c080158b1c	chore: add advanced PR auto-labeling configuration and workflow (#3767) ... # Description of Changes Please provide a summary of the changes, including: - Added `.github/labeler-config-srvaroa.yml` to define a comprehensive auto-labeling configuration for PRs based on title patterns and file paths. - Introduced a new GitHub Actions workflow `.github/workflows/auto-labelerV2.yml` that uses the `srvaroa/labeler` action to automatically label pull requests. - Extended `.github/labels.yml` to include missing label definitions required for the auto-labeling setup (e.g., `Bugfix`, `build`, `ci`, `perf`, etc.). --- ## Checklist ### General - [ ] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [ ] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [ ] I have performed a self-review of my own code - [ ] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-18 22:27:50 +01:00
stirlingbot[bot]	ddad1eddef	🌐 Sync Translations + Update README Progress Table (#3766) ... ### Description of Changes This Pull Request was automatically generated to synchronize updates to translation files and documentation. Below are the details of the changes made: #### **1. Synchronization of Translation Files** - Updated translation files (`messages_*.properties`) to reflect changes in the reference file `messages_en_GB.properties`. - Ensured consistency and synchronization across all supported language files. - Highlighted any missing or incomplete translations. #### **2. Update README.md** - Generated the translation progress table in `README.md`. - Added a summary of the current translation status for all supported languages. - Included up-to-date statistics on translation coverage. #### **Why these changes are necessary** - Keeps translation files aligned with the latest reference updates. - Ensures the documentation reflects the current translation progress. --- Auto-generated by [create-pull-request][1]. [1]: https://github.com/peter-evans/create-pull-request Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>	2025-06-18 18:50:56 +01:00
albanobattistella	ec805209a5	Update messages_it_IT.properties (#3763) ... # Description of Changes Please provide a summary of the changes, including: - What was changed - Why the change was made - Any challenges encountered Closes #(issue_number) --- ## Checklist ### General - [ ] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [ ] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [ ] I have performed a self-review of my own code - [ ] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-18 18:49:16 +01:00
Balázs Szücs	50aa5e718d	Added Hungarian translations for audit dashboard and added the untranslatable items to .toml file (#3765) ... # Description of Changes - Added Hungarian translations for various audit dashboard elements, including titles, filters, and modal details. - Added new ignore tags in `ignore_translation.toml` to accommodate additional untranslatable fields for the Hungarian locale. --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [x] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-18 18:48:56 +01:00
Anthony Stirling	64766a129c	Version prop fix + test (#3764) ... # Description of Changes Please provide a summary of the changes, including: - What was changed - Why the change was made - Any challenges encountered Closes #(issue_number) --- ## Checklist ### General - [ ] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [ ] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [ ] I have performed a self-review of my own code - [ ] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-18 18:46:20 +01:00
Ludy	cdd1ab704f	fix: ensure locale-safe formatting in GeneralUtils.formatBytes (#3762) ... # Description of Changes Please provide a summary of the changes, including: - Updated `GeneralUtils.formatBytes(long bytes)` to use `Locale.US` for consistent number formatting across environments. - This resolves test failures caused by locale-specific formatting (e.g., comma vs. dot as decimal separator) that led to assertion mismatches during unit tests. see: https://github.com/Stirling-Tools/Stirling-PDF/pull/3562 --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [x] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-18 17:00:39 +01:00
Ludy	8632ccb870	style: improve formatting and import order consistency across codebase (#3761) ... # Description of Changes This pull request applies consistent formatting and import ordering across the codebase. Specifically: - Reordered imports according to the configured Spotless `importOrder()` directive. - Enabled formatting flags such as `trimTrailingWhitespace`, `leadingTabsToSpaces`, and `endWithNewline`. - Resolved inconsistencies in blank lines and spacing between imports and annotations. - Applied consistent formatting to annotations and method declarations. - Removed unused or redundant import statements. This change improves code readability, enforces a consistent style, and prepares the codebase for future automated formatting checks. --- ## Checklist ### General - [x] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [x] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [x] I have performed a self-review of my own code - [x] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-18 17:00:26 +01:00
stirlingbot[bot]	a208d55525	🌐 Sync Translations + Update README Progress Table (#3760) ... ### Description of Changes This Pull Request was automatically generated to synchronize updates to translation files and documentation. Below are the details of the changes made: #### **1. Synchronization of Translation Files** - Updated translation files (`messages_*.properties`) to reflect changes in the reference file `messages_en_GB.properties`. - Ensured consistency and synchronization across all supported language files. - Highlighted any missing or incomplete translations. #### **2. Update README.md** - Generated the translation progress table in `README.md`. - Added a summary of the current translation status for all supported languages. - Included up-to-date statistics on translation coverage. #### **Why these changes are necessary** - Keeps translation files aligned with the latest reference updates. - Ensures the documentation reflects the current translation progress. --- Auto-generated by [create-pull-request][1]. [1]: https://github.com/peter-evans/create-pull-request --------- Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>	2025-06-18 13:14:13 +01:00
Anthony Stirling	552f2ced4d	Auditing support (#3739) ... # Description of Changes This pull request introduces a comprehensive auditing system to the application, along with minor updates to existing utilities and dependencies. The most significant changes include the addition of audit-related classes and enums, updates to the `ApplicationProperties` model to support auditing configuration, and enhancements to utility methods for handling static and trackable resources. ### Audit System Implementation: * **Audit Aspect for Method Annotations**: Added `AuditAspect` to process the new `@Audited` annotation, enabling detailed logging of method execution, HTTP requests, and operation results based on configurable audit levels. (`proprietary/src/main/java/stirling/software/proprietary/audit/AuditAspect.java`) * **Audit Event Types**: Introduced `AuditEventType` enum to define standardized event types for auditing, such as authentication events, file operations, and HTTP requests. (`proprietary/src/main/java/stirling/software/proprietary/audit/AuditEventType.java`) * **Audit Levels**: Added `AuditLevel` enum to define different levels of audit logging (OFF, BASIC, STANDARD, VERBOSE), providing granular control over the amount of data logged. (`proprietary/src/main/java/stirling/software/proprietary/audit/AuditLevel.java`) ### Application Properties Update: * **Audit Configuration in `ProFeatures`**: Updated the `ProFeatures` class in `ApplicationProperties` to include support for auditing with configurable retention days, levels, and enablement flags. (`common/src/main/java/stirling/software/common/model/ApplicationProperties.java`) ### Utility Enhancements: * **Static and Trackable Resource Handling**: Extended `RequestUriUtils` methods (`isStaticResource` and `isTrackableResource`) to recognize `.txt` files as valid static and trackable resources. (`common/src/main/java/stirling/software/common/util/RequestUriUtils.java`) [[1]](diffhunk://#diff-de3599037908683f2cd8f170939547612c6fc2203e9207eb4d7966508f92bbcbR22) [[2]](diffhunk://#diff-de3599037908683f2cd8f170939547612c6fc2203e9207eb4d7966508f92bbcbR39) ### Dependency Update: * **Spring Validation Starter**: Added `spring-boot-starter-validation` to project dependencies to support validation mechanisms required for auditing features. (`proprietary/build.gradle`) Dashboard WIP    --- ## Checklist ### General - [ ] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [ ] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [ ] I have performed a self-review of my own code - [ ] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details. --------- Co-authored-by: a <a> Co-authored-by: pixeebot[bot] <104101892+pixeebot[bot]@users.noreply.github.com>	2025-06-18 13:11:36 +01:00
Anthony Stirling	ee41dc11c2	formatting and versionNumber to always build (#3759) ... # Description of Changes Please provide a summary of the changes, including: - What was changed - Why the change was made - Any challenges encountered Closes #(issue_number) --- ## Checklist ### General - [ ] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [ ] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [ ] I have performed a self-review of my own code - [ ] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-18 13:11:14 +01:00
Anthony Stirling	5a272f80b0	Update PR-Demo-Comment-with-react.yml for security flags (#3757) ... # Description of Changes Please provide a summary of the changes, including: - What was changed - Why the change was made - Any challenges encountered Closes #(issue_number) --- ## Checklist ### General - [ ] I have read the [Contribution Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md) - [ ] I have read the [Stirling-PDF Developer Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md) (if applicable) - [ ] I have read the [How to add new languages to Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md) (if applicable) - [ ] I have performed a self-review of my own code - [ ] My changes generate no new warnings ### Documentation - [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed) - [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only) ### UI Changes (if applicable) - [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR) ### Testing (if applicable) - [ ] I have tested my changes locally. Refer to the [Testing Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing) for more details.	2025-06-18 11:28:31 +01:00